HVI ultra Conductor
High-voltage-resistant, insulated down conductor for maintaining the separation distance from electrically conductive parts as per IEC 2305-3:2024. The inner conductor cross-section also complies with NFPA 780.
Can be used for an equivalent separation distance of up to s ≤ 75 cm (in air), s ≤ 150 cm (solid building material).
Depending on the protection class of the lightning protection system (LPS), the following maximum cable lengths can therefore be achieved for a down conductor:
LPS I max. 9.35 m
LPS II max. 12.50 m
LPS III/IV max. 18.75 m
The HVI ultra Conductor meets the requirements of DIN EN IEC 62561-8 (VDE 0185-561-8).
Can be used for an equivalent separation distance of up to s ≤ 75 cm (in air), s ≤ 150 cm (solid building material).
Depending on the protection class of the lightning protection system (LPS), the following maximum cable lengths can therefore be achieved for a down conductor:
LPS I max. 9.35 m
LPS II max. 12.50 m
LPS III/IV max. 18.75 m
The HVI ultra Conductor meets the requirements of DIN EN IEC 62561-8 (VDE 0185-561-8).
HVI ultra Conductor (on a reel)
The HVI ultra Conductor for on-site assembly comes in a length of 100 m on a disposable reel (diameter approx. 800 mm, width approx. 485 mm).
Part No. 819836
HVI U 75 30 L100M GR M