DEHN Press

Simon Thaler
Simon Thaler
Director of Corporate Communications
+49 151 146 308 90
simon.thaler@dehn.de
Ute Pfister
Ute Pfister
Spokesperson for Trade Media, Surge Protection in Energy Technology, Lightning Protection/Earthing
+49 151 117 92 610
ute.pfister@dehn.de
 Hannes Wolf
Hannes Wolf
Spokesperson for Trade Media, Surge Protection in Information Technology, Safety Equipment, Services
+49 160 31 74 927
hannes.wolf@dehn.de
20261111_pm_dehn_iec_62561-8.jpg
16.11.2026
Product

Quality put to the test: DEHN solutions as per IEC 62561-8

The publication of IEC 62561-8:2026 marks the introduction of the first international product standard for components of electrically insulated lightning protection systems. It supplements the IEC 62305-3 lightning protection standard, which sets out the planning, installation and required separation distances. Whilst IEC 62305-3 specifies when and where a separation distance must be maintained, the new IEC 62561-8 defines the requirements and test procedures for the components used to achieve this distance in practice. Together they create a consistent regulatory framework, from the planning stage right through to the certified product. DEHN’s HVI and DEHNiso ranges have been tested in accordance with IEC 62561-8, providing a technically verifiable basis for standard-compliant insulated lightning protection solutions.Electrically insulated lightning protection has established itself as a technologically mature solution that comes into its own where conventional systems reach their physical limits. This is particularly relevant when the deliberate and targeted routing of lightning currents is required in structures with an unknown current-carrying capacity or in potentially explosive atmospheres. Today, high-voltage-resistant insulated conductors (HIL/HVI) are regarded as the state of the art in sensitive technical environments, such as mobile communications, wind power and chemical plants, potentially explosive atmospheres, and installations with sensitive electrical or electronic infrastructure. This technology is particularly relevant for complex roof and façade structures, especially when the distance to conductive components is only small. In addition, it is suitable for buildings with an increased fire risk due to flammable roof coverings, organic insulating materials or other fire-hazardous building materials. The aim is to install standard-compliant lightning protection products to prevent lightning strikes in and around the building: in short, preventative fire protection.The introduction of IEC 62561-8 as an international product standard is a necessary response to the varying levels of quality in the market for safety-critical lightning protection components. As the reliability of these components has a direct impact on the protection of human life and material assets, the standard sets out precise test procedures based on many years of scientific research. It describes tests for environmental resistance, mechanical withstand, lightning current carrying capability and dielectric strength. In addition, there are system tests for defined arrangements such as proximity to metallic components, supporting tubes, or down conductors routed in parallel. The demanding and stringent testing requirements set out in the product standard make it easier to compare the quality of lightning protection components and lay the foundations for high-quality and safe lightning protection components.HVI and DEHNiso products from DEHN are tested by certified and accredited laboratories in accordance with IEC 62561-8. The systems are designed for specific applications and enable standard-compliant implementation of electrically insulated lightning protection concepts. The key factor here is the combination of tested components, proper planning and professional installation. Compliance with specifications such as bending radii, stripping lengths, connection torques and permissible distances ensures the long-term protective function. For planning engineers, installers and operators, this means increased certainty when selecting products, verifiable technical quality and a standard-compliant basis for applications in which hazardous overvoltages, partial lightning currents, fire risks or malfunctions in sensitive equipment must be reliably prevented.Further information is available here.

Latest posts

Year
Categories
✕

Image E-world 1800x1200 px
Smart Protection Concepts for Resilient Grid Infrastructures: DEHN at E-world 2026

The energy transition can only succeed if security of supply is consistently taken into account. The more electrification, digitalization, and renewable energy generation are expanded, the more vulnerable systems become to disruptions. At E-world energy & water 2026 in Essen, DEHN will demonstrate how critical energy infrastructures can be reliably protected against lightning and surge damage. From February 10 to 12, 2026, the company will present comprehensive protection concepts for smart energy grids, battery energy storage systems (BESS), and charging infrastructure for electric trucks and buses in Hall 6, Booth 6B140. Decentralized feeders, digital local network stations, and modern communication and control systems make power grids more efficient, but at the same time more vulnerable to disruptions. Lightning interference, surges, and EMC influences are among the key challenges. At the trade fair, DEHN will demonstrate how these risks can be specifically minimized—from risk analysis and planning to the complete implementation of protection concepts. Lightning and surge protection is a key system factor for grid stability and, consequently, for the success of the energy transition.Battery storage systems and digital local network stations, in particular, are emerging as critical components of the energy landscape. Outages have a direct impact on logistics, public transportation, industrial processes, and energy supply. DEHN presents practical protection solutions for these applications that balance both safety and cost-effectiveness. This is because companies, too, are under increasing pressure to operate in a more sustainable and efficient manner. Reasons for this include rising energy costs and new, more comprehensive political mandates for energy efficiency and climate neutrality. In Essen, DEHN experts will provide information on current regulatory requirements and share practical know-how for the efficient implementation of protection measures. They will advise on products and system solutions related to surge protection, grounding, equipotential bonding, and the protection of power and data lines, particularly in the fields of energy and e-mobility. In addition, they will present engineering services that support plant operators throughout all project phases—from risk analysis and planning to technical implementation. 

09.12.2025

Image DEHNventil ACI M TNS 6000x4000 px
DEHNventil ACI closes the gap: Advanced Circuit Interruption now extended to the area of Type 1 arresters

Digitalisation, networked systems and automation are rendering modern electrical installations increasingly complex. The rising proportion of renewable energy sources in the grid is changing its parameters in terms of short-circuit behaviour and protection technology, creating fresh challenges for planners and installers. With the new DEHNventil ACI M TNS 264 FM, DEHN is the first supplier to launch an arrester for Type 1 applications based on its ACI (Advanced Circuit Interruption) technology. The specialist for lightning and surge protection and safety equipment is thus expanding its established ACI portfolio for Type 2 arresters to create a comprehensive product family which fulfils the increasingly stringent requirements on surge protection in the field of electrical installation and planning. Conventional overcurrent protection such as fuses or circuit breakers is only to a limited extent suitable for protecting surge protective devices (SPDs), as required by IEC 60364-5-53:2001/A2:2015, as they can trigger unintentionally when exposed to lightning or impulse currents. The maximum backup fuse specified for the SPD does not reliably protect against residual currents in the range of several tens or hundreds of amperes, which can lead to thermal overload. By introducing the innovative ACI technology here, DEHN is pursuing a completely new approach. The classic overcurrent protection concept is replaced by integrating a powerful switch/spark gap combination directly into the surge protective device. In addition to offering overcurrent protection, this provides galvanic isolation in normal conditions. So, there are no leakage currents and the resistance to mains frequency temporary overvoltage (TOV) is significantly increased. This technology offers numerous advantages for planners and installers, reducing the planning effort without compromising operational safety. Dimensioning errors, questions about selectivity and complex calculations are now a thing of the past. Reliable protection on the feed-in sideBesides setting standards in the Type 2 and DC areas, ACI technology is also of central importance for protection on the feed-in side, especially for Type 1 lightning current arresters. This is where high short-circuit currents and complex network conditions come together. IEC 60364-5-53:2001/A2:2015 requires that surge protection be installed as close as possible to the feeding point of the system. In practice, this is often difficult because connection cables may not be longer than 0.5 metres in order to prevent inductive voltage drops.The modular combined arrester (Type 1+2+3) DEHNventil ACI M TNS 264 FM facilitates implementation: The integrated ACI technology eliminates the need for arrester backup fuses. The device can be mounted directly on earthed DIN rails or earthing rails. A cross-sectional area of 16 mm² Cu is always sufficient, since, even in the event of a fault, the integral current is so low that the connection cable is not thermally overloaded.The disconnection function allows the module to be replaced safely during operation, either from the side or from the front, using insulated tools.Technical details can be found here.

24.11.2025

Image DEHN gala 2025 6708x4472 px
An evening of exceptional performances: DEHN Gala 2025

Employees are the foundation of every successful company. The DEHN Gala once again highlighted just how diverse and varied their contributions can be to a company’s overall success. Last Friday evening, the Neumarkt-based specialist in lightning, surge, and occupational safety invited employees celebrating work anniversaries, graduates of continuing education programs, and, last but not least, the winners of the company’s own Values Awards to its facility in Mühlhausen—for a special evening celebrating special achievements. The highlight of the gala was the recognition of 63 employees for their long-standing service. Four of them can even look back on 45 years at DEHN. When they began their careers at DEHN, the second generation of the DEHN family was still at the helm. Today, Dr. Philipp Dehn, a member of the fourth generation, serves as CEO. The four employees celebrating their anniversaries, who have been part of DEHN since 1980, witnessed how a regional business grew into a globally successful family-owned company. Each of them has made a unique contribution to DEHN’s positive development.Twenty-nine graduates of the training and continuing education programs were also honored—a testament to the company’s efforts beyond its numerous accolades as a training provider. Values That Bring Us TogetherAnother highlight: the presentation of the DEHN Values Awards. Employees from around the world received the award in various categories for their exceptional dedication and exemplary embodiment of the company’s values. 

04.11.2025

Image earth rode set D18014 1200x1200 px
Retrofitting earthing systems: a breeze with the DEHN earth rod set

Retrofitting earthing systems in existing buildings poses challenges for owners and specialised companies. A functioning earthing system is essential, especially when it comes to renovations, energy modernisations or the installation of photovoltaic systems, wall boxes and heat pumps. However, many existing buildings lack proof of standard-compliant earthing or use outdated systems such as water pipe net-works. In addition, limited space, sealed surfaces and difficulty accessing the soil often make conventional retrofitting a complex and costly undertaking. With the new D18014 earth rod set, DEHN provides a practical solution specially developed for the requirements of renovating existing buildings.To comply with standards, the electrical installation must be equipped with a functional earthing system that safely conducts fault currents to earth, thereby ensuring its safety and functionality. It protects people from hazards, such as lightning exposure, and prevents fires. In Germany, an earthing system is a standard requirement for electrical installations, espe-cially in new buildings. But owners of existing buildings often deliberate on whether retrofit-ting is mandatory when they embark on a renovation or modernisation project.Although there is no general obligation to renew the entire electrical installation in older buildings, newly installed or modified system components, such as technical extensions re-lating to renewable energies, must comply with the applicable safety and technical stand-ards. The relevant standards for the installation of an earthing system are DIN VDE AR-N 4100 and DIN 18014.The D18014 earth rod set from DEHN contains all the necessary components for the profes-sional installation of earth rods and is particularly suitable for new buildings and existing buildings with limited soil or minimal excavation possibilities. Whatever the season, the earth rod solution ensures and maintains stable earth resistance regardless of weather con-ditions or soil moisture. The set meets all relevant standards by complying with the re-quirements of DIN 18014 and the applicable VDE specifications. Its versatility makes it suit-able for a variety of applications, including partial renovations, selective upgrades, installa-tion inside the building or a complete renewal of the earthing system.The set consists of five earth rods, each 1 metre long, to be inserted into the ground. A driv-ing spike makes it easier to drive in the rods. The earth rods are connected to the connecting cable (round wire 8-10 mm or cable 16-50 mm2) without a cable lug using a connection clamp. This establishes a secure connection between the earthing system and the main earthing busbar (MEB) of the electrical installation. For buildings with a foundation area of up to 200 m², two sets are required to meet the normative requirements. Installation in-volves minimal disruption of existing outdoor facilities. Only two small excavation sites and wall bushings are necessary.Technical details can be found here. 

27.10.2025

Image DEHNguard md 1500x850 px
Yet more innovation: DEHN opts for new double screw technology for surge protective devices

Long connection cables, which cause inductive voltage drops in switchgear cabinets, often pose a challenge for installers. DEHN solves this problem with an innovative advancement of its proven connection technologies. With the new double screw technology in the Type 2 + 3 surge protective device series DEHNguard MD, the company is once again confirming its pioneering role. This technology complements the existing screw and push-in connection terminal and enables the wiring of different types of conductors. The feed-through wiring option also offers even greater flexibility in terms of electromagnetic compatibility (EMC) for applications with a nominal current of up to 63 A. Push-in technology has proven itself in many areas thanks to its tool-free, fast and secure wiring – especially in residential construction with smaller cross-sections of connection cables. With the new double screw technology, DEHN is now going one step further. Two terminals per pole enable continuous wiring ('V-connection') without additional pin-shaped terminals. The technology allows the use of conductors with a larger cross-section – for two through cables up to 16 mm² each or as a stub line up to 35 mm². This makes it a robust connection that remains permanently stable even under vibration or mechanical stress such as temperature fluctuations.The DEHNguard MD series with double screw technology is particularly advantageous for EMC-compliant wiring in accordance with DIN VDE 0100-534 / IEC 60364-5-53, as there are no high, inductive voltage drops generated across the connection cables. Optional feed-through wiring saves on components and ensures that maximum cable lengths comply with standards. This makes it easier to integrate into existing systems – a huge advantage when retrofitting.The DEHNguard MD has also proven itself in power distribution and switchgear cabinet building, as it meets strict requirements for current-carrying capacity and safety. Areas such as building automation and critical infrastructure also benefit from integrated double screw technology, as it enables durable and low-maintenance connections. In building technology, a supply cable with a cross-section of 16 mm² can now also be easily connected to the device using feed-through wiring.A floating remote signalling contact reliably indicates the status. Defective protection modules in the DEHNguard MD series can be quickly replaced during operation without having to disconnect the wiring.You can find the technical details here.  

15.10.2025

Image Sustainability Report Update EN 1200x1200 px
Making responsibility visible: DEHN update on sustainability

Sustainability is one of the main pillars of DEHN's corporate strategy. In a brief update, the company highlights key figures, progress made, and strategic priorities; thus, providing transparent information on the status of its sustainable development.A little under a year after publishing its first sustainability report, DEHN has produced a revised version for the financial year 2024/2025. This reaffirms the family-owned company's commitment to consistently expanding its responsibility and transparency. Alongside key figures, strategic orientation and organisation, the report highlights the four areas of action: responsible corporate management, being a responsible and attractive employer, responsibility for products and services, and ecological responsibility.Concrete measures, such as determining the “product carbon footprint” (PCF), substantiate this commitment. In 2025, with the aim of assessing and reducing their environmental impact, the PCF was calculated for the first 20 products in the DEHN portfolio. The calculation was carried out in collaboration with the Fraunhofer Institute for Building Physics IBP in line with four internationally recognized standards: ISO 14067, ISO 14040, ISO 14044, and EN 15804+A2. This contribution to climate protection also enables customers to actively improve their own carbon footprint.Moreover, the update focuses on DEHN's progress and continuous pursuit of its sustainability strategy. The ultimate goal is to establish and maintain the right balance between ecological, social and corporate responsibility in the long term.The latest report can be found here.

header_steelclamp_1500x1500px.webp
Hard as steel: The new connection clamp from DEHN

Integrating steel girders, metal sheets, or profiles into lightning protection or equipotential bonding systems often presents a challenge. This is particularly true when protective coatings against corrosion prevent the direct, conductive connection that is essential for effective lightning current discharge or equipotential bonding. The new connection clamp for steel girders from DEHN overcomes this hurdle with a special blade that penetrates coated surfaces up to 0.2 mm without damaging the surface protection. It is therefore particularly suitable for buildings with metallic structures, such as industrial plants, halls, and multi-storey car parks.The clamp is made of high-quality materials and can be used wherever an electrical connection to steel girders, sheets, and profiles is required. With a variable clamping range of 3 to 52 mm, it offers maximum flexibility during installation. The product is approved for use in Zone 2/22 hazardous areas and has a high lightning current carrying capability of up to 100 kA (10/350 μs). It fulfils the requirements of the DIN EN 62561-1 standard and provides a permanently safe, electrically conductive connection even under high loads during a lightning strike.The clamp is available in various designs and materials, both in stainless steel (V2A) and galvanised steel (HDG), with a double clamp or connection bracket. Suitable for round and flat material as well as cables, it is extremely versatile. Typical applications include lightning equipotential bonding with round wire, the installation of air-termination rods without drilling, or the connection of steel girders to earthing systems using connection lugs. The special 7-segment digits also allow use as a test joint, an additional advantage when it comes to testing or maintenance. 

250911_pm_dehn_aunda.jpg
A+A 2025: DEHN sets new standards for electrical safety – comprehensive and smart

Under the slogan 'Vision ZERO: Your path to electrical safety', DEHN will be presenting a broad range of products and solutions for comprehensive work safety at A+A 2025 in Düsseldorf. From 4 to 7 November, DEHN will be demonstrating how innovative solutions, digital services and practical applications can ensure greater safety in the workplace at stand B59 in hall 14. DEHN takes its holistic approach to protection based on the 'TOP principle', which encompasses technical, organisational, and personal measures one step further by integrating smart technology. The expert for safety equipment offers tailor-made solutions for each of these areas, which can be flexibly integrated into different safety concepts. DEHN is thus expanding the approach to ‘TOP+S’.The DEHNshort arc fault protection system supports technical safety by being integrated into low-voltage installations. It detects electric arcs and stops them within milliseconds. This significantly reduces the incident energy and enables rapid recommissioning. The DEHNproX product range from DEHN includes safety devices for implementing the 5 safety rules and live working. This year, the company is introducing a new smart highlight from this product series. DEHNarX carries out systematic risk assessments and defines targeted protective measures. This service is provided by arc fault protection experts at DEHN. In addition, DEHNcare personal protective equipment not only provides reliable protection in the event of an arc fault, but also impresses due to being very comfortable to wear and available in a wide range of sizes for men and women. The DEHNsense EFD (Electrical Field Detector) complements the TOP principle as a smart, technical measure. The small, compact device, which can be easily worn on a helmet or wrist, detects electrical hazards at an early stage, warns immediately upon entering the danger zone and thus increases safety when working on electrical systems. The EFD can be individually configured using the DEHNwork app. Depending on the requirements of the respective system, the device can be conveniently adjusted via smartphone.With its combination of electrical engineering expertise, smart technologies and practical solutions, DEHN is setting new standards for electrical safety – comprehensive, digital and smart. Experience safety – with structure and strategyA special highlight of this year's A+A trade fair appearance is the interactive tour of the exhibition stand into the world of electrical safety. He guides visitors through the various protection levels and brings DEHN's protection solutions to life in a practical way.

09.09.2025

Image Team EcoVadis 2560 x 1440 px
Holistic approach to sustainable business: EcoVadis honours DEHN for its commitment to sustainability

As of August 2025, DEHN SE ranks among the top 15 percent of companies assessed by EcoVadis. This is confirmed by the silver medal awarded by the leading provider of global sustainability ratings. ‘We are very proud that our efforts have been acknowledged with the silver medal. For us, this is a big step in the right direction and an incentive for further successes in the area of sustainability,’ explains Dr Philipp Dehn, CEO of DEHN SE.EcoVadis' rating method is based on international sustainability standards such as the Global Reporting Initiative (GRI), the UN Global Compact and ISO 26000. The platform enables companies to assess the sustainability performance of their suppliers worldwide.The assessment focuses on four areas: environment, labour and human rights, ethics and sustainable procurement.The specialist for lightning and surge protection and safety equipment operates photovoltaic systems with a capacity of 1,250 kWp for its own electricity generation at its Mühlhausen site. Energy is saved through heat recovery and concrete core activation. The new production facility also complies with the KfW 40 standard and has extensive environmentally friendly green roofing and areas with typical local sandy grassland. The company already uses only green electricity at its headquarters in Neumarkt.In its supply chain, DEHN relies on transparent processes and a partnership-based approach to suppliers. DEHN has been part of the UN Global Compact since 2024, a commitment underlined by its own code of conduct for business partners and comprehensive risk management in accordance with the Supply Chain Due Diligence Act (LkSG).DEHN develops durable products and supplements them with digital services to conserve resources and increase safety in an increasingly electrified world. Anchoring sustainability firmly in product design and innovation processes is a goal the company is striving hard to achieve.As an employer, DEHN also demonstrates responsibility by offering professional development opportunities, flexible working hours for a good work-life balance, and a wide range of health care options. The same applies to active inclusion, for example, through cooperation with the JURA Werkstätten in Neumarkt to integrate people with disabilities into the workplace at the site in Mühlhausen. ‘With the EcoVadis rating, we want to make it clear to our customers and suppliers that sustainability is not only an important value in our partnership but, alongside innovation, a cornerstone of our success,’ explains Susanne Horn, Director of Corporate Development at DEHN.

27.06.2025

250627_pr_dehn_weltblitzschutztag.jpg
World Lightning Safety Day 2025: Safety Starts Before the Lightning Strikes

The German Insurance Association (GDV) estimates that lightning and surge damage will cost 350 million euros in 2024. 1.5 million of the 100 million lightning strikes worldwide were recorded in Germany. This trend underscores the importance of reliable protection solutions. As a specialist in lightning, surge, and occupational safety, DEHN is committed to protecting people, buildings, and technical systems, and is highlighting the importance of this issue, particularly on this year’s World Lightning Protection Day. These days, there is an increase in thunderstorms again. Especially in the summer, thunderstorms occur more frequently and increase the risk of lightning strikes. Modern households are equipped with numerous sensitive electronic devices that can easily be damaged by surges. These include smart home technology, photovoltaic systems, charging stations, and heat pumps. Effective lightning and surge protection can not only safeguard electronics from destruction but also prevent fires caused by lightning strikes. Especially since damage caused by power surges is not always covered by home contents or building insurance. A good reason to take appropriate measures for lightning and surge protection in your home. DEHN offers comprehensive protection solutions—from consultation to implementation As a reliable partner, DEHN supports customers with comprehensive solutions for external and internal lightning protection—from air-termination systems and grounding systems to surge protection devices. External lightning protection safely diverts lightning strikes into the ground and protects buildings from fire. Internal lightning protection prevents damage to electrical systems and equipment. Whether for private homes, commercial buildings, critical infrastructure, hospitals, data centers, or energy suppliers—reliable lightning and surge protection is indispensable in all sectors. For over 115 years, DEHN has stood for protection, quality, and innovation. In addition to a broad product portfolio, the company offers customized protection concepts. You can find a clear overview of our specific solutions, including product recommendations, documentation, and helpful services, on our website.